Pv ultrapure water equipment

　　Equipment parameters:
　　Name: pv ultrapure water equipment
　　Model: zl-tyn001
　　Operating pressure: 0.7 1.5 (Mpa)
　　Water resistivity: 18 million
　　Water: 0.2-10 t/H
　　Voltage: 380/220 (V)
　　Power: 1.5-100 - k (w)
　　Electrical conductivity: 0.02
　　The desalination rate: 99.9 (%)
　　Single output: 0.2 T - 10 T/h)
　　The solar cell power generation principle:
　　The solar cell is a light have response and can convert light energy into electrical devices.Can produce the material, there are many kinds of photovoltaic effect, such as: monocrystalline silicon, polycrystalline silicon, amorphous silicon, gallium arsenide, copper indium selenium, etc.Their power generation principle of basic same, crystal as an example which is used to describe the light power generation process.P-type crystalline silicon after doped phosphorus available N type silicon, forming a p-n junction.When light solar cell surface, part of photons absorbed by the silicon material;Photon energy transfer to the silicon atom, make electronic happened more moved, a free electron concentration on both sides of p-n junction formed the potential difference, when external processing circuit, under the action of the voltage, there will be a current through the external circuit to produce the output power.The essence of this process is the process of the photon energy into electricity.
　　Pv ultrapure water equipment in equipment design, use mature, reliable, advanced, high degree of automation of two-stage RO + EDI, in addition to salt water treatment technology of the mixed bed, ensure the ultrapure water quality after handling the water resistivity is 18.2 M. Omega cm.Key equipment and materials adopt international mainstream advanced and reliable products, adopt PLC + touch screen control, a full set of system a high degree of automation, high system stability.Greatly save manpower cost and maintenance cost, high water utilization efficiency, reliable operation, economic and reasonable.The device compared with other similar products, have a higher cost performance and equipment reliability.

Pv ultrapure water equipment

　　Preparation:
　　1.The pretreatment system, reverse osmosis system - the middle water tank - coarse to fine mixed bed, mixed bed pure water to pure water pump, uv sterilizer to polishing mixed bed, water precision filters - > object (18 m or higher. Omega CM) (traditional)
　　2.The pretreatment to reverse osmosis to the middle water tank, water pump, EDI device to purified water, pure water pump to uv sterilizer, polishing mixed bed to 0.2 or 0.5 mu m precision filter, water object (18 m or higher. Omega CM) (the latest technology)
　　3.Pretreatment to level 1 reverse osmosis, dosing machine (PH adjustment) to the middle water tank, the second reverse osmosis (positive) reverse osmosis membrane to pure water, pure water pump to EDI device, uv sterilizer to 0.2 or 0.5 mu m precision filter, water object (or 17 m omega. CM) (the latest technology)
　　4.Pretreatment to reverse osmosis to the middle water tank, water pump, EDI device to pure water, pure water pump - > uv sterilizer to 0.2 or 0.5 mu m precision filter, water object (15 m or higher. Omega CM) (the latest technology)
　　5.Pretreatment to reverse osmosis system, the intermediate water tank - pure water pump - coarse to fine mixed bed, mixed bed to the precision filter, ultraviolet sterilizer water object (15 m or higher. Omega CM) (traditional)
　　Quality standard:
　　My company electronic ultrapure water effluent is completely in line with the United States ASTM equipment level pure water water quality standard, the electronic industry in our country level water quality standards (18 M omega. Cm, 15 M omega. Cm, to 10 M. Omega cm, 2 M omega. Cm, 0.5 M omega. 5 cm), electronic industry high pure water for water quality standard in our country, the United States, Japan semiconductor industrial pure water index integrated circuit water quality standard, and large scale integrated circuit water quality standards at home and abroad.